# Geekvape Sonder for tasting, pod, airflow and e-liquid > The Geekvape Sonder read through a taster's eyes. Pod, airflow and e-liquid, the three choices that shape attack, mid-palate and finish. A pod kit with no button and no screen sells itself as a device that asks nothing of you. For a notebook that reads every recipe as attack, mid-palate and finish, that simplicity raises a real question. How do you judge an e-liquid on a Geekvape Sonder when the power cannot be set and the product pages only talk about battery life and colours? Is a disappointing bottle really disappointing, or simply badly served by the pod you chose? ## Is the Geekvape Sonder good for tasting e-liquid? Yes, provided you accept that it is tuned somewhere other than on a screen. The **Geekvape Sonder**, whether the Sonder Q, the Q 2 or the Sonder U, fires when you draw and offers no power setting at all. One retailer's spec sheet says so plainly, the wattage is not variable. That leaves the taster three levers. The pod sets the coil and its heating range, the airflow slider controls the draw, and the e-liquid itself decides what the wick can deliver. Matched well, those three choices let you read a recipe methodically. ## What the device fixes, and what it leaves to the palate Geekvape lists an output of 5 to 25 W for the Sonder Q, with no control to choose it. The Sonder Q 2 goes up to 30 W and the Sonder U to 20 W. None of these figures can be set by hand. For tasting, that limit has an upside. Two bottles tried on the same pod receive the same heat, which makes the comparison fairer than on a box mod whose wattage you nudged between two tries. The maker also credits its VPU heating technology with a mellower taste and a stable output. Those are brand claims, describing an intention rather than a published measurement. ## Which Geekvape Sonder pod for which recipe Choosing the pod is the setting with the biggest consequences. The table below sets the published ranges against the notebook's own view. The last two columns, the family of recipes each resistance serves best and the stage of the grid that comes through most, are a tasting judgement and come from no product page. | Pod | Published range | Draw | Recipes served (notebook's view) | Clearest stage (notebook's view) | |---|---|---|---|---| | Q 1.2 ohm | Not published by Geekvape | Tight | Classic tobacco blends, high-PG recipes | Attack | | Q 0.8 ohm | 12 to 18 W | Tight to semi-open | Fruit, menthol recipes | Attack and mid-palate | | Q 0.6 ohm | 18 to 25 W | Restricted open | Light desserts, ripe fruit | Mid-palate | | Q 0.4 ohm | 25 to 30 W | Most open | Desserts, dense recipes | Mid-palate and finish | | U 0.7 ohm | 16 to 19 W | Tight | Fruit, classics | Attack | | U 1.1 ohm | 9 to 12 W | Very tight | Delicate recipes | Attack and finish | The ranges for the 0.8 and 0.6 ohm Q pods appear on the official Sonder Q page. Two retailers give the 0.4 ohm range, while the 1.2 ohm range differs from one retailer's page to the next. The U pod figures come from Geekvape's Sonder U page. ### Tight pods for a clean attack The 0.8 and 1.2 ohm pods are listed as tight-draw options by two retailers. They run cool and concentrate the vapour. The top notes of a fruit recipe tend to stand out more distinctly, which makes the attack easier to read. ### Open pods for a rounder mid-palate More open, the 0.6 and 0.4 ohm pods run hotter and give a warmer vapour. Desserts and creamy recipes usually gain body in the middle of the puff, at the cost of a less detailed attack. The 0.4 ohm stays reserved for the Sonder Q 2, since Geekvape does not list it among the pods compatible with the original Sonder Q. ## Airflow, the setting that shapes the attack On both the Sonder Q and the Q 2, a side slider adjusts the airflow, from loose to tight according to the maker's page. It is the only fine adjustment the device allows, and it acts first on the start of the puff. Closed down, the airflow tightens the vapour and draws the flavours together. Bright notes such as citrus or mint come through more clearly in the attack. Opened up, it thins the vapour and softens the whole, which suits a recipe that feels too sweet or too cool on a tight draw. To compare two bottles, leave the slider in the same position. Writing its position next to each impression keeps you from mistaking the effect of the setting for that of the recipe. ## Sweet recipes and a burnt finish on the Geekvape Sonder The finish is the most fragile stage on a small pod. A dry or burnt note at the end of a puff most often comes from a wick that is short of liquid, not from the recipe itself. Geekvape's FAQ lists several causes of a burnt taste, among them a poorly primed coil, puffs taken too close together, too much power, a tank running low, and an e-liquid too heavy in vegetable glycerine or too sweet. On the **Geekvape Sonder**, power cannot be adjusted, which leaves the e-liquid and priming as the main levers. One retailer's user guide recommends an e-liquid with no more than 50% vegetable glycerine and a wait of at least ten minutes after filling. A very sweet dessert recipe usually clogs a wick faster, and its finish blurs before the rest. [Dinner Lady's three desserts taken stage by stage](/uk/dinner-lady-tasting-notes/) give a sense of this, their patisserie profile needing a clean wick to keep a crisp finish. ## One pod per recipe The coil in these pods cannot be changed on its own. The same user guide reminds readers to replace the whole pod once the coil shows signs of wear. For tasting, that constraint suggests a simple method. A wick usually holds on to a strong flavour, menthol or aniseed above all, which distorts the next bottle. Keeping one pod per family of recipes, cool ones on one side and dessert ones on the other, stops you from reading a residue instead of a recipe. Aniseed recipes show the risk well. [Pink Dragon, Xbud's red fruit and aniseed](/uk/pink-dragon-e-liquid-tasting-notes/) is one of those that benefit from a pod of its own. ## Sonder U and Sonder Q Lite, two separate branches The range does not stop at Q pods. Two devices deserve a separate reading, because they change either the pod or the heating promise. ### The Sonder U and its 1.1 ohm pod The Sonder U uses a U pod, distinct from the Q series. Geekvape offers it at 0.7 ohm, 16 to 19 W, and at 1.1 ohm, 9 to 12 W, describing it as a tight and mellow mouth-to-lung draw. The lower-power of the two U pods, this 1.1 ohm suits a palate trying to read the attack of a delicate recipe. ### The Sonder Q Lite and its claimed heating The Sonder Q Lite comes in a stainless steel body according to its official page. That page highlights faster and more even heating, an e-liquid strike-through speed it puts 25% higher and an output that stays stable as the battery runs down. For tasting, that last point matters most, since a constant heat, if it holds up, keeps the same reading from the start to the end of a charge. ## FAQ Five practical questions come up around the range, beyond flavour. ### What is the maximum nicotine strength for a Sonder e-liquid in the UK? In the UK, nicotine e-liquid is capped at 20 mg/ml and sold in bottles of 10 ml at most. Geekvape says the Sonder Q works with both nicotine salts and freebase nicotine. ### Does the Sonder Q take the 0.4 ohm pod? No. Geekvape lists the 0.6, 0.8 and 1.2 ohm pods for the Sonder Q and keeps the 0.4 ohm for the Sonder Q 2. A UK retailer also flags it as incompatible with the original Sonder Q. ### What changes between the Sonder Q and the Sonder Q 2? The maker publishes the comparison. The Q 2 moves from 25 to 30 W, from 1000 to 1350 mAh, from a plastic body to aluminium alloy, and from a three-colour light to a multicolour light ring. ### Do Sonder Q 2 pods fit a Wenax? Yes, for several models. Two retailers say Q pods also fit Wenax devices, the Wenax Q and Wenax Q Pro according to one, the Wenax Q2 and Q Ultra according to the other. In the UK, refillable pods are limited to 2 ml, so the compliant 2 ml version is the one sold in the UK. ### How big is the Sonder U? Geekvape gives 26.6 mm in width, 95.8 mm in height and a weight of 40 g. Its pod holds 2 ml. ## Geekvape Sonder, a fixed base for comparing recipes With no power setting, this pod imposes a useful discipline. A pod chosen for the family of recipes, airflow left at the same position and an e-liquid that stays at or below 50% glycerine are enough for a reliable reading. Our verdict is simple. The **Geekvape Sonder** does not reveal a recipe on its own, but on the same pod it serves every bottle the same way, which makes it an honest bench for comparison. The subject of the tasting remains the recipe, read stage by stage, whatever the device. ## More tasting notes - [Dinner Lady vape tasting notes, three desserts taken stage by stage](/uk/dinner-lady-tasting-notes/) - [Pink Dragon e liquid, Xbud's red fruit and aniseed taken stage by stage](/uk/pink-dragon-e-liquid-tasting-notes/) - [Fighter Fuel tasting notes, eight recipes taken stage by stage](/uk/fighter-fuel-tasting-notes/) Tasting notes written for adult readers only. Vaping products can contain nicotine, which is a highly addictive substance. Vaping products are not for sale to anyone under 18 in the UK. These notes describe equipment and are not a buying recommendation.